FTIR Characterisation and chemo-mechanical distinction of retted kenaf fibres

Publicado 2023-01-25
Seção Research Articles

Autores

  • Emmanuel Chukwuma Omenna Obafemi Awolowo University
  • Bukola Victoria Ailenokhuoria Obafemi Awolowo University

DOI:

https://doi.org/10.7770/safer-V5N4-art1311

Resumo

Inadequate information on the binding characteristics of kenaf biomass at the molecular level has adversely affected the modifications of its cellulose-hemicellulose-lignin structure. This study was undertaken to assess the characteristic features and chemo-mechanical properties of kenaf fibres retted under three different media namely: tank, stream and ribbon. Fourier transform infra-red (FTIR) spectra analysis as well as the ASTM standard for tensile tests were applied. The results showed that the broad bands occurred at the range of 3312-3420 cm−1for all the retted fibres were due to the presence of hydroxyl (–OH) group while the peaks were obtained at 1635.76, 1635.34, and 1730.69 cm−1for stream, tank and ribbon retted fibres respectively. However, tank rettedfibres had the most broad band intensity at 3419.78cm-1while ribbon fibres had the highest absorption peak of 1730.69cm-1corresponding to C=O stretching of the acetyl group in hemi-cellulose. Stream retted Kenaf fibres had the highest tensile strength followed by the tank retted fibres while ribbon fibres had the least. Furthermore, there was no significant difference between stream and tank retted Kenaf fibres in terms of tensile modulus and this was significantly higher than that of ribbon fibre. The α-cellulose content of stream retted fibres was slightly higher than that of ribbon fibres while tank retted fibres had the least. From the results, tank retted Kenaf fibre was ranked as ‘the best fibre’ with the most intensive broad bands and least in lignin and hemi-cellulose content which were regarded as the impurities, gummy and waxy materials, responsible for an easy deformation of the fibre cellular networks.